Ubiquiti LiteAP 120 Price in Kenya

Ubiquiti LiteAP 120 LAP-120 Price in Kenya

The Ubiquiti LiteAP 120 LAP-120 is a 5GHz airMAX AC outdoor wireless product for a planned fixed network installation. It is intended for buyers who need a connection between fixed locations or compatible customer premises equipment, rather than an ordinary indoor Wi-Fi router. Select it around the required service, the existing remote equipment, the available spectrum, and the installation position. Those factors determine whether the product is the right fit for your network in Kenya.

A correctly designed installation can carry the network services required at the remote location, such as access to an existing internet gateway, business applications, or permitted CCTV traffic. The wireless equipment does not create an internet subscription. Your upstream router, service connection, and local distribution equipment still provide their respective functions. This distinction helps you buy the complete solution instead of expecting a radio to replace every other device in the network.

Key Specification

Feature

Specification

Model

LAP-120

Frequency band

5GHz

Platform

airMAX AC

Antenna

120° integrated sector

Documented gain

16dBi

Ethernet interfaces

1 × Gigabit Ethernet

Maximum consumption

7W

Power arrangement

24V 0.5A passive PoE

Configuration

airOS with model specific access methods

Installation

Outdoor fixed mounting with appropriate protection

Design and model specific features

The LAP-120 combines an airMAX AC radio with a sector antenna in a single outdoor assembly. Its purpose is to serve compatible fixed wireless clients across a planned area. The 120° description identifies a coverage class, not guaranteed service throughout a geographic radius. The model should not be described as having the LAP-GPS synchronization hardware or a built-in management Wi-Fi radio.

The integrated construction keeps the antenna and radio together as a defined product. That can simplify equipment selection compared with assembling an unrelated antenna, transmitter, and RF cable package. Installation quality still matters: the feed or enclosure must be correctly positioned, mounting components must be secure, and cables need strain relief. An integrated design reduces some assembly choices but does not remove the need for a site survey or commissioning tests.

Choose the correct network role

This model is an integrated sector access point for compatible fixed wireless clients. It directs service toward a defined area, so place it around the distribution of customer locations rather than the center of a room. Each intended customer needs suitable receiving equipment, a clear enough path, and the correct configuration. A sector is not a promise of equal signal everywhere within its nominal angle, and it should not be described as providing 360° coverage.

Plan the client group before installation. List the customer locations, heights, required service speeds, and likely simultaneous activity. A client near the sector edge may have different conditions from a client near its center. Representative testing should therefore include several positions rather than only the easiest connection. The access point also needs enough upstream capacity to support the intended service mix during busy periods.

Frequency and protocol compatibility

The 5GHz band and airMAX AC platform are purchasing requirements, not interchangeable labels. Before replacing an existing device, record the remote model, firmware, operating mode, and power specification. Ask whether the proposed replacement is supported in that exact configuration. Sharing a brand or enclosure shape is not enough. A device on another band cannot connect simply because its product name resembles this model.

Choose the LAP-120 when its sector shape, client compatibility, and required aggregate traffic suit the project. Compare the LAP-GPS where timing coordination or a different sector pattern is part of the design. For a single narrow connection, an integrated directional CPE may be more appropriate than dedicating a broad sector to 1 endpoint.

Plan subscriber coverage around the 120 degree sector

A broad sector is useful when intended customers are spread horizontally across a service area, but it also receives energy from more directions than a narrow client antenna. Choose the mounting direction using the whole customer group. A coverage test directly in front of the device does not establish that a distant client near the boundary will have enough margin. Include height differences and local obstacles in the assessment.

The original LAP-120 design should be configured using its supported access methods, not instructions copied from the LAP-GPS. Prepare wired management before mounting. If a mobile setup accessory is part of the installation workflow, confirm that accessory separately. This avoids arriving on site expecting a management hotspot that the selected hardware does not provide. Store the final configuration together with the sector direction and a list of approved client models.

Antenna direction and installation position

Position the equipment around the radio path rather than convenience alone. Check rooftops, trees, terrain, metal structures, and other objects between the endpoints. Space around the path also matters, so a narrow visual gap does not automatically establish a reliable installation. Consider seasonal vegetation and possible future obstructions. If the required clearance cannot be achieved, reassess the mounting locations or use another network route instead of relying on additional transmit power.

A stable support is as important as a promising signal reading. Wind movement can change alignment, while a cable pulling on an enclosure can gradually disturb its position. Use a support and fasteners suitable for the equipment and exposure. Keep adjustment accessible for commissioning, then secure the assembly without changing its final aim. Working at height and near electrical infrastructure requires appropriate trained installation practices.

Ethernet speed and practical service capacity

A Gigabit Ethernet interface provides a faster wired handoff than a Fast Ethernet port, but it does not guarantee Gigabit wireless throughput. The injector, upstream switch, cable, and remote equipment must also support the required connection. A damaged cable pair or lower-speed injector can cause a slower negotiated link. Check the actual interface status during commissioning rather than assuming that every component carrying an RJ45 socket has the same data capability.

Plan service capacity around real traffic. Browsing, cloud applications, camera uploads, backups, and voice calls have different patterns. Several simultaneous users may need more aggregate capacity than a short single-user test suggests. Distinguish a wireless link test from an internet speed test: a restricted service subscription or busy test server can conceal the radio capacity, while a radio-only test does not prove the rest of the network is working correctly.

Channel planning and interference

Survey conditions at both ends of the connection. A channel that appears quiet at the main site can be busy at the customer location. Nearby access points, other fixed links, and unrelated equipment can change conditions during the day. Select a permitted channel and channel width around the required service and measured environment. The widest setting is not automatically the most reliable, particularly where clean spectrum is limited.

Do not respond to every performance issue by raising transmit power. Excessive signal can be unhelpful, and transmit settings need to remain appropriate for the equipment and local configuration. Check alignment, noise, channel overlap, and the remote endpoint first. If several radios share a location, coordinate their channels, spacing, and supported timing arrangements. Treat a new nearby transmitter as a possible environmental change when a previously stable link deteriorates.

Power supply and cable requirements

The documented supply arrangement for this product is 24V 0.5A passive PoE. Match the actual delivered unit and its installation instructions before connecting power. Voltage alone does not establish compatibility; polarity, powered pairs, current capacity, and Ethernet capability also matter. Keep the injector in a dry indoor location unless a complete alternative enclosure arrangement is specifically designed for the environment. The outdoor rating of a radio does not automatically apply to its indoor power adapter.

Cable resistance and poor terminations can reduce delivered power. A radio that works on a short bench cable may restart or fail on a long damaged run. Use the specified cable construction, inspect connector quality, and avoid improvised joints. Where shielding and grounding are required, maintain them through the installation. An injector is not an Ethernet extender, so keep the complete cable channel within the limits specified for the equipment and cabling system.

Grounding and weather protection

Treat the outdoor installation as a system containing the radio, mount, cable, surge protection, building entry, and electrical supply. Follow the manufacturer's grounding instructions and protect exposed connectors from water. Arrange cable entries so water cannot run into indoor equipment. Leave service loops and strain relief where appropriate without creating sharp bends. Electrical protection features inside a product do not make an installation immune to lightning or eliminate the need for correct grounding.

Practical uses in Kenyan networks

For a business with separate buildings, the equipment can transport a planned network connection between the locations when the path and counterpart are suitable. The receiving building still needs the correct local networking equipment. Decide whether devices should share an existing LAN or use a routed, isolated design. That decision affects addressing, troubleshooting, and security. Avoid accidentally extending a flat business network to a location where users should have restricted access.

For a school, hotel, farm, or estate, assess the actual service required at each location. A remote office, gate camera, and guest area can have different availability and capacity needs. Allow for power interruptions at both ends, not just the main site. If backup power is required, include the radio, injector, router, switches, and any other equipment needed to keep the service path operating.

Detailed setup and commissioning guide

1. Survey the installation before ordering. Record the endpoint locations, proposed mounting heights, obstructions, cable routes, power availability, and intended service. Confirm that the selected model and counterpart fit the plan. This prevents an unsuitable device from being purchased simply because a similar model worked at another site.

2. Confirm the full equipment list. Include the radio or radios, approved injectors, AC cables, mounting hardware, Ethernet cable, connectors, and specified protection accessories. Check whether the quotation covers a single unit, a pair, or a multipack. Included accessories can differ between packages and replacement-only stock.

3. Bench-test before mounting. Connect the unit using a short known-good cable and its approved supply. Keep test radios at sensible power settings for close separation. Confirm that the hardware starts reliably and can be reached through the supported management method before it is installed somewhere difficult to access.

4. Secure the management account. Change default administrator credentials and retain access details securely. Assign unique management addresses or a documented reservation scheme that fits the network. Do not expose the management interface directly to the public internet merely to make remote servicing easier.

5. Check firmware and compatibility. Use firmware intended for the exact model and hardware revision, and preserve a backup where supported. Read the relevant release information before upgrading an existing working network. Match the counterpart and supported operating mode rather than assuming that every same-band device will associate.

6. Configure the service design. Choose bridge or other supported behavior according to the network plan. Set wireless security, permitted country settings, channel selection, and channel width. Keep the management network distinct from customer services where the wider design provides that separation. Verify VLAN handling across every connected component.

7. Use the supported wired configuration method and the correct injector. The original documentation refers to an optional U-Installer for certain mobile setup workflows; do not assume the radio itself provides a built-in management hotspot. Aim the sector around the actual client distribution, then test coverage at both central and edge locations.

8. Mount the equipment securely and complete cabling. Provide weather protection, strain relief, grounding, and specified surge protection before commissioning. Keep the injector indoors and identify the LAN input and powered output clearly. A neatly labeled installation reduces later mistakes when several similar devices are serviced together.

9. Aim the sector around the planned clients. Set horizontal direction and elevation deliberately, then connect representative customer units. Include locations near the center and edges. Do not approve the sector solely because the closest client works. Review the weakest intended locations before adding production traffic.

10. Test the complete network path. Confirm management access, expected addressing, local resources, and internet access where required. Check the negotiated Ethernet speed and test traffic in both directions. A successful ping demonstrates reachability, but it does not establish adequate throughput or reliable performance under load.

11. Run a sustained commissioning test. Observe latency, packet loss, retries, and service behavior while representative traffic is active. Test at a relevant busy period where possible. Record the result with the channel settings and signal measurements so future maintenance can distinguish an environmental change from an original design limitation.

12. Save and document the final configuration. Export backups where supported and label the radio, injector, cable destination, and management address. Record the approved power model and mount position. Confirm that the installation can be serviced safely without relying on the memory of the original technician.

Troubleshooting common installation problems

Symptom

Checks

No power

Approved source, AC supply, PoE socket, cable, and connector condition

No wireless association

Protocol, roles, security, channel, country setting, and firmware

Good signal but slow traffic

Interference, airtime, Ethernet speed, channel width, and test equipment

Intermittent operation

Power losses, water ingress, unstable mount, and changing interference

Connected but no internet

Gateway, routing, VLANs, DHCP, DNS, and service connection

Troubleshoot in a sequence rather than changing several settings at once. First confirm power and the Ethernet link, then management access, then wireless association, and finally the application service. Change 1 variable and retest. If a short cable and controlled test restore operation, investigate the installed run. If the radio link remains healthy while internet access fails, inspect the upstream services before replacing the outdoor equipment.

Security and routine administration

Use strong device credentials and appropriate wireless security supported by both endpoints. Limit administration to trusted users and networks. Keep a current inventory of management addresses and hardware revisions, and review updates against the operating requirements of the whole link. An unmanaged or forgotten outdoor radio can become difficult to support even when its physical installation is sound. Backups are valuable only if they are securely stored and can be associated with the correct device.

Maintenance and service life

Inspect the mount, cable jacket, connector seals, and accessible grounding connections at suitable intervals. Compare current signal and performance with commissioning records. New vegetation, construction, corrosion, and nearby radios can change the environment without any configuration change on your equipment. Investigate those causes before compensating with transmit settings. After severe weather, check for movement or cable damage using safe access procedures.

Advantages

The LAP-120 provides a defined integrated radio and antenna arrangement for its intended airMAX AC role. A planned installation can reduce the need to run a physical cable between separate locations. Model-specific management provides measurements useful for commissioning and fault isolation. The product can be particularly relevant where compatibility with existing equipment has already been verified and the requested service falls within the interface and radio limits.

Disadvantages and purchase limitations

The product requires compatible remote equipment, a suitable radio path, correct power, and competent installation. It does not remove the need for a router, local switch, indoor access point, or internet subscription where those are required. Shared spectrum can change over time, and a strong initial signal is not a guarantee of long-term availability. Budget for the supporting hardware and maintenance rather than comparing the radio price alone.

Frequently asked questions

Does this product provide an internet subscription

No. It transports a connection supplied by the wider network when correctly configured. Your service provider, upstream gateway, and any authentication or billing system continue to provide their own functions. If the main internet service is unavailable, the radio does not create a replacement service, although permitted local traffic may still work across a healthy bridge.

Do I need equipment at the other location

Yes. A fixed wireless connection requires a compatible counterpart or supported existing base station. Confirm the exact model and operating mode before buying. A phone or laptop is not a substitute for the receiving CPE in a planned outdoor infrastructure link. The remote location may also need a router, switch, or indoor access point.

Can I reuse the injector from another Ubiquiti product

Only after confirming the electrical and data requirements. Check voltage, polarity, powering pairs, current capacity, and Ethernet capability against the actual device instructions. Similar appearance and a matching RJ45 socket are not proof. An injector that is unsuitable for the equipment or cable run can cause instability or damage.

Will the advertised gain or radio rate guarantee a distance

No. Those figures describe particular characteristics, not a complete service guarantee. Usable distance and capacity depend on both endpoints, path clearance, interference, configuration, mounting, and required reliability. Ask for a path assessment and realistic commissioning criteria. Avoid making a purchase around a distance claim that ignores the installation conditions.

Can the link carry cameras and business traffic together

It can transport compatible network traffic within its actual capacity and configuration. Calculate the combined camera stream load and allow room for other services. Plan access controls and any required traffic separation. A bridge connection should not automatically give camera equipment or untrusted remote users unrestricted access to the main business network.

What should be checked before replacing an older radio

Record the current model, hardware revision, firmware, frequency band, wireless mode, and power source. Preserve a configuration backup where supported. Confirm the proposed replacement against the remote endpoint, not just the product title. If changing platforms, plan the entire link and a rollback procedure instead of assuming that only the customer device needs replacement.

How should performance be tested

Use suitable endpoints and test the service in both directions while observing the radio and Ethernet status. Separate local link capacity from internet-service capacity. Include sustained traffic and relevant busy periods rather than relying only on a short speed test. Record latency, packet loss, and configuration so later results can be compared fairly.

Is an outdoor radio the same as an indoor access point

No. This product is selected around a fixed outdoor infrastructure role. Indoor client coverage has different antenna, placement, and user requirements. A common installation uses the outdoor equipment to bring the network to a building, then a separate indoor access point to connect phones and laptops throughout the occupied rooms.

Buy the correct model in Kenya

Choose the Ubiquiti LiteAP 120 LAP-120 from Ubiquity UniFi Kenya after matching the required service, counterpart, power source, and installation conditions. Confirm the full model number, supplied accessories, hardware condition, warranty terms, and delivery arrangements before ordering. For a new deployment, provide the endpoint locations and capacity requirement. For a replacement, provide the existing radio and injector labels so the correct compatibility checks can be made.

Related products and compatible system planning

Prioritize the exact model when replacing equipment. The following links provide related radio families and alternative deployment approaches. A shared frequency or purpose does not make products interchangeable: check the counterpart, protocol, power, antenna pattern, and service capacity before changing platforms.

LiteAP 120 sector option; LiteBeam M5 client option; NanoStation Loco M5

NanoStation 5AC Loco; PowerBeam M5 400; PowerBeam AC Gen2

LiteAP GPS sector option; Ubiquiti wireless model comparison; DISC Lite5 ac alternative platform

LHG 5 ac alternative platform; LHG XL 5 ac alternative platform; Outdoor wireless equipment at Reisen

Explore the Ubiquity UniFi Kenya collection

Ubiquiti airMAX PowerBeam M5; Ubiquiti LiteAP GPS; Ubiquiti airMAX LiteBeam M5